Can't figure out the timer on these outdoor candles
These candles are not like regular luminara candles. The bottom has a button instead of a switch and there are no instructions on how to set the timer. Can you please give me instructions.
I have the same candle. To set the timer you push the little green button the bottom of the candle to power up (turn on) the candle. When you have pushed the button, the candle should be on (lighted).
To set the timer, you take the remote control which should have four different buttons on it:
- Green ON button
- Red OFF button
- Black 5H button for "5 Hours", and a
- 10H button for "10 Hours"
After turning on the candle with the button on the bottom of the candle, point the remote control at the candle and press the 5H button to tell the candle to stay on for 5 hours. The candle will blink off and back on one time to confirm the 5 hour setting.
If you want it to stay on for 10 hours, press the 10H button and the candle will blink on and off two times to confirm the 10 hour setting.
You can turn the candle on or off with the remote. You can power the candle completely off, i.e. turn off the batteries with the little green button on the bottom of the candle. This turns the entire candle off, it won't respond to the remote control when you turn it off with the button on the bottom of the candle.
To power up the candle again, push the little green button on the bottom of the candle, it will power up, be illuminated and will respond to commands from the remote control.
Good luck.
7 months ago

by
GMUNCH
Texas, USA